Bomag Roller BW 100 AD-4, BW 120 AD-4, BW 125 AD-4 - Operating Manual - Maintenance Instructions
Bomag Roller BW
BOBMAG ROLLER BW 100 AD-4, BW 120 AD-4, BW 125 AD-4 - OPERATING & MAINTENANCE MANUAL
BOBMAG ROLLER BW 100 AD-4, BW 120 AD-4, BW 125 AD-4 - OPERATING & MAINTENANCE MANUAL - English Operating Manual - Maintenance Instructions, to vehicles Bomag Roller BW 100 AD-4, BW 120 AD-4, BW 125 AD-4. CONTENTS: - 1 Foreword 3 - 2 Technical Data 9 - 3 Safety regulations 17 - 4 Indicators and Controls 31 - 4.1 General notes 34 - 4.2 Description of indicators and control elements 34 - 5 Operation 45 - 5.1 General 46 - 5.2 Tests before taking into operation 46 - 5.3 Electronic immobilizer 47 - 5.4 Adjusting the operator's seat 47 - 5.5 Starting the engine 48 - 5.6 Starting with jump wires 50 - 5.7 Driving the machine 51 - 5.8 Stopping the machine, operating the parking brake 53 - 5.9 Shutting down the engine 53 - 5.10 Switching the vibration on and off 54 - 5.11 Switching the gravity sprinkling system on and off 57 - 5.12 Switching the pressure sprinkling system on and off 57 - 5.13 Switching the tire sprinkling system on and off (only AC) 59 - 5.14 Actuating the emergency stop switch 59 - 5.15 Mounting/removing the chip spreader 60 - 5.16 Filling/emptying the chip spreader 62 - 5.17 Operating the chip spreader 63 - 5.18 Towing 64 - 5.19 Loading/transport 67 - 6 Maintenance 71 - 6.1 General notes on maintenance 72 - 6.2 Fuels and lubricants 73 - 6.3 Table of fuels and lubricants 76 - 6.4 Running-in instructions 77 - 6.5 Maintenance table 78 - Every 10 operating hours 81 - 6.6 Check the engine oil level 81 - 6.7 Checking the fuel level 81 - 6.8 Check the hydraulic oil level 82 - 6.9 Checking the hydraulic oil filter element 83 - 6.10 Check the coolant level 83 - 6.11 Check the water separator 84 - 6.12 Checking the water level 84 - 6.13 Checking the emulsion level 85 - 6.14 Checking the chip spreader and cleaning the spreading beam 85 - Every 50 operating hours 87 - 6.15 Checking fuel lines and clamps 87 - 6.16 Servicing the chip spreader 87 - Every 250 operating hours 89 - 6.17 Changing engine oil and oil filter 89 - 6.18 Checking, cleaning, replacing the combustion air filter 91 - 6.19 Check the air intake lines 94 - 6.20 Cleaning radiator and hydraulic oil cooler 95 - 6.21 Checking, tensioning, replacing the V-belt 96 - 6.22 Checking radiator hoses and hose clamps 96 - 6.23 Checking, adjusting the scrapers 97 - Every 500 operating hours 99 - 6.24 Battery service 99 - 6.25 Change the fuel filter 100 - 6.26 Drain the fuel tank sludge 101 - Every 1000 operating hours 103 - 6.27 Checking, adjusting the valve clearance 103 - 6.28 Check the engine mounts 104 - Every 2000 operating hours 105 - 6.29 Changing hydraulic oil and breather filter 105 - 6.30 Changing the hydraulic oil filter 106 - 6.31 Changing the coolant 107 - 6.32 Replacing the fuel lines 109 - 6.33 Check the injection valves 109 - Every 3000 operating hours 111 - 6.34 Checking the fuel injection pump 111 - As required 113 - 6.35 Checking the tire pressure 113 - 6.36 Cleaning the water sprinkler system 113 - 6.37 Draining the water sprinkler system, maintenance in case of frost 115 - 6.38 Filling the provision tank for the windscreen washer system 116 - 6.39 Tightening torques for screws with metric unified thread 116 - 6.40 Engine conservation 117 - 7 Trouble shooting 119 - 7.1 General notes 120 - 7.2 Engine 121 - 8 Disposal 123 - 8.1 Final shut-down of machine 124
Bomag Roller BW 100 AD-4, BW 120 AD-4, BW 125 AD-4 - Operating Manual - Maintenance Instructions
inicio - index
coche - car
moto
4x4
quad - buggy
cami n - truck
e-mail