daewoo%20solar%20s200w-v%20excavator%20-%20service%20manual,%20repair%20manual.gif

DAEWOO SOLAR S200W-V EXCAVATOR - WORKSHOP, SERVICE, REPAIR MANUAL

- .

CONTENTS:

SAFETY
Wheel Excavator Safety S0102020
- To the Operator of a Daewoo Excavator
- Learn the Signal Words Used with the Safety Alert Symbol
- General Safety Essentials
- Accessory Applications
- Lifting Capacity Rating Configuration
- Location of Safety Labels
- Summary of Safety Precautions for Lifting in Digging Mode
- Unauthorized Modifications
- Work-site Precautions
- Attachment Precautions
- Avoid High-voltage Cables
- Before Starting to Dig, Contact Authorities
- Be Aware of Height Obstacles
- Use Care on Loose Support
- Use Solid Support Blocking
- Overhangs Are Dangerous
- Sloping Terrain Requires Caution
- Stay Alert for People Moving through the Work Area
- Be Aware of and Conform to Local Regulations
- Operation
- Operate While Seated at the Operator s Station ONLY
- Before Starting the Engine
- Never Use Ether Starting Aids
- Mounting and Dismounting
- Observe General Safety Rules
- Engine Ventilation
- Asbestos Dust Hazard Prevention
- Take Time to Provide Good Visibility
- Fuel, Oil and Hydraulic Fluid Fire Hazards
- Boost Starting or Charging Engine Batteries
- Travel Controls May Produce Reversed Operations
- Keep "Pinch Point" Areas Clear - Use Caution in Reverse & Swing
- Travel Precautions
- Operate Carefully on Snow and Ice and in Very Cold Temperatures
- Parking the Machine
- Shutdown Control Functions
- Equipment
- Rough Operation May Require Use of Certified Safety Equipment
- Install Additional Safety Equipment If Conditions Require
- Movement Alarms
- Seat Belts Should Be Used at All Times
- Window Glass Breaking Tool
- Keep a Fire Extinguisher at Hand
- Maintain Standard Safety Equipment in Good Condition
- Safety-critical Parts Must Be Replaced Periodically
- Hydraulic Cylinder Seals Require Periodic Replacement
- High Pressure Hydraulic Lines Can Store a Great Deal of Energy
- The Operator s Cab and Turntable Deck Should Be Kept Clean
- Wear Eye Protection and Safety Clothing
- Breathing Masks, Ear Protection May Be Required
- Battery Electrolyte and Explosive Gases Can Be Lethal
- Disconnect Batteries for Electrical Service Before Electrical Welding
- Use Low Heat Portable Lighting
- Maintenance
- Use Warning Tag Control Lockout Procedures During Service
- Do not Run the Engine If Repairs or Work Is Being Performed Alone
- Always Use Adequate Equipment Supports and Blocking
- Do not Work on Hot Engines or Hot Cooling or Hydraulic Systems
- Cool-down Is Required Prior to Radiator or Reservoir Checks
- Pressurized Hydraulic Oil Fluid Leaks Can Be Dangerous
- Obtain immediate medical attention if pressurized oil pierces the skin.
- Use Correct Replacement Fasteners Tightened to Proper Torque
- Dispose of All Petroleum-based Oils and Fluids Properly
- Shipping and Transportation
- Obey State and Local Over-the-Road Regulations
SPECIFICATIONS
Specifications for Solar 200W-V S0202040
- General Description
- Component Location
- General Dimensions
- Dimensions
- Working Range
- Hydraulic Cylinders
- Engine Specifications
- Engine Performance Curves (Per KS-R1004 Standard)
- Approximate Weight of Workload Materials
- General Specifications
- Hydraulic System Component Specifications
- System Component Specifications
- Drive System
- Swing Mechanism
- Brake System
- Steering System
- Chocking System
- Performance Tests and Standards
- Standards
- Tests
- Test Conditions
- Travel Speed Tests
- Swing Speed Test
- Swing Speed Test
- Swing Force Test
- Cylinder Performance Tests
- Boom Cylinders Test
- Arm Cylinder Test
- Hydraulic Cylinder Natural Drop Test
GENERAL MAINTENANCE
General Maintenance Procedures S0302000
- Welding Precautions and Guidelines
- Hydraulic System - General Precautions
- Maintenance Service and Repair Procedure
- General Precautions
- Hydraulic System Cleanliness And Oil Leaks
- Maintenance Precautions for Hydraulic System Service
- Oil Leakage Precautions
- Cleaning and Inspection
- General Guidelines
- Bearing inspection
Standard Torques S0309000
- Torque Values for Standard Metric Fasteners
- Torque Values for Standard U.S. Fasteners
- Type 8 Phosphate Coated Hardware
- Torque Values for Hose Clamps
- Torque Values for Split Flanges
- Torque Wrench Extension Tools
- Torque Multiplication
- Other Uses for Torque Wrench Extension Tools
- Tightening Torque Specifications (Metric)
UPPER STRUCTURE
Cab S0402020
- Removal
- Installation
- Window and Gasket Replacement
- Falling Object Protective Structures (F.O.P.S.)
Counterweight S0403000
- General
- Removal
- Installation
Fuel Tank S0405070
- General Description
- Parts List
- Specifications
- Removal
- Installation
- Start-up Procedures
Swing Bearing S0407010
- Swing Bearing Maintenance
- Operating Recommendation
- Measuring Swing Bearing Axial Play
- Measuring Bearing Lateral Play
- Swing Bearing Basic Operation
- Rebuilding Swing Bearing
Swing Reduction Gearbox S0408040
- General Description
- Theory of Operation
- Parts List
- Specifications
- Special Tools and Materials
- Special Tools
- Troubleshooting, Testing and Adjustment
- Removal
- Disassembly
- Cleaning and Inspection (Wear Limits and Tolerances)
- Reassembly
- Installation
LOWER STRUCTURE AND CHASSIS
Ram Lock Valve Operation S0503000
- Theory of Operation
ENGINE AND DRIVE TRAIN
Front Axle S0602100
- Special Tools
- Hub Nut Tool
- Disassembly
- Planetary End
- Differential Gear
- Cleaning and Inspection (Wear Limits and Tolerances)
- Reassembly
- Differential Gear
- Planetary End
- Start-up Procedures
- Axle Lubrication
Transmission, Final Drive and Rear Axle S0602110
- Transmission Operation
- Special Tools
- Hub Nut Tool
- Transmission Disassembly
- Detaching Drive (Input) Housing
- Disassembly of Input Shaft and Brake Assembly
- Disassembly of Clutch
- Disassembly of Planetary Carrier
- Disassembly of Shift Lever and Helical Gear
- Disassembly of Shift Lock (Version A)
- Disassembly of Shift Lock (Version B)
- Final Drive Disassembly
- Rear Axle Disassembly
- Differential Gear Disassembly
- Cleaning and Inspection (Wear Limits and Tolerances)
- Differential Gear Reassembly
- Rear Axle Reassembly
- Final Drive Reassembly
- Transmission Reassembly
- Reassembly of Helical Gear
- Reassembly of Shift Lever
- Reassembly of Planetary Carrier
- Adjusting Shift Lever
- Preassembling and Installing Clutch
- Checking Clutch
- Reassembly of Brake and Input Shaft Assembly
- Installing Drive (Input) Housing
- Assembly of Shift Lock (Version A)
- Assembly of Shift Lock (Version B)
- Installing Oil Pump
- Installing Screw Plugs and Oil Lines
- Start-up Procedures
- Axle Lubrication
- Lubrication
Air-Conditioner S0605010
- General Description
- Refrigerant Circulation
- Control Panel
- Control Specifications
- Temperature Level Control and Display
- Air Discharge According to Path Selection
- Air-conditioning System Circuit Diagram
- Troubleshooting
- Refrigerant System Repairs
- Refrigerant Safe Handling Procedures
- Repair and Replacement Procedure
- Refrigerant Recovery
- Vacuuming Refrigerant System
- Leakage Check
- Refrigerant Charging
- Inspecting System For Leakage
Drive Coupling (Main Pump) S0609000
- Drive Coupling
- Special Tools
- Kawasaki Pump Tool
- Uchida Pump Tool
- Drive Coupling Installation
- Installation Procedure
HYDRAULICS
Hydraulic System Troubleshooting, Testing and Adjustment S0702110
- Hydraulic System - General Notes
- Operation of Working Components
- Boom Operating Circuit
- Boom Up Circuit
- Boom Down Circuit
- Arm Operating Circuit
- Arm Crowd Circuit
- Arm Dump Circuit
- Bucket Operating Circuit
- Bucket Crowd Circuit
- Bucket Dump Circuit
- Swing Operating Circuit
- Right Swing Operating Circuit
- Left Swing Operating Circuit
- Swing Relief Valve and Make-up Valve
- Procedural Troubleshooting Baseline Recommendations
- Initial Checks and Tests to Establish Operating Condition of the Excavator
- Pilot Pressure
- Adjustment and Testing
- Power Mode Valve
- Current Signal and Hydraulic Pressure Adjustments
- Boom/Swing Priority Valve
- Control Valve Pressure and Current Adjustments
- Pressure Up Valve
- Checks and Adjustments
- Pump Input Power Control
- Pump Regulator Adjustment
- Flow Meter and Flow Meter Kit Installation and Testing
- Swing System Troubleshooting
- Precautions/Initial Checks
- Swing Relief Valve Checking and Adjustment
- Troubleshooting   Swing Gearbox
- Troubleshooting   Hydraulic Problems
- Troubleshooting   Control Valve
- Troubleshooting   Joystick Control Valve
Accumulator S0703000
- General Description
- Specifications
- Accumulator Charging
- Charging the Accumulator with Nitrogen
Center Joint (Swivel) S0704070
- General Description
- Parts List
- Troubleshooting, Testing and Adjustment
- Inspection
- Testing
- Disassembly
- Reassembly
Cylinders S0705000
- General Description
- Theory of Operation
- Parts List
- Special Tools and Materials
- Piston Nut
- Piston Jig
- Disassembly
- Reassembly
Swing Motor S0707250
- General Description
- Theory of Operation
- Swing Motor Anti-cavitation Make-up Valve
- Relief Valve
- Swing Brake Operation
- Parts List
- Specifications
- Special Tools
- Disassembly
- Cleaning and Inspection (Wear Limits and Tolerances)
- Reassembly
Travel Motor S0707350
- General Description
- Theory of Operation
- Parts List
- Specifications
- Travel Motor General Disassembly and Reassembly Instructions
- Recommended Tools
- Precautions for Disassembly and Assembly
- Disassembly of Travel Motor
- Appearance of Motor
- Removal of counterbalance Valve
- Removal of Outer Piping
- Removal of Stroke Limiter
- Removal of Oil Seal
- Removal of Control Unit
- Removal of Control Valve
- Disassemble Control Valve
- Disassemble Stroke Limiter
- Reassemble Stroke Limiter
- Reassemble Control Valve
- Installation of Control Valve
- Reassembly of Travel Motor
- Assembly of Control Unit
- Installation of Oil Seal
- Installation of Stroke Limiter
- Installation of Outer Piping
- Installation of Counterbalance Valve
MAin Pump (With Regulator, Steering Pump and Brake Pump) S0708430
- General Description
- Gear (Pilot) Pump
- Relief Valve
- Pump Regulator Description
- Horsepower Control
- Power Shift Control
- Negative Oil Discharge (Pump Bypass) Control
- Pump Regulator Operation
- Pump Output Decrease
- Pump Discharge Decrease
- Pump Discharge Increase
- Horsepower Control
- Overload Protection
- Regulator Adjustment
- Pump Input Power Control Adjustment
- Parts List
- Specifications
- Hydraulic Pump Performance Characteristics
- Troubleshooting, Testing and Adjustment
- Main Pump
- Disassembly
- General Disassembly
- Main Pump Disassembly
- Pump Regulator Disassembly
- Cleaning and Inspection (Wear Limits and Tolerances)
- Reassembly
- Pump Regulator Reassembly
- Main Pump Reassembly
Brake Supply Valve S0709220
- Parts List
- Specifications
Counterbalance Valve S0709300
- General Description
- While Operating to Run Forward
- While Operating to Stop
- While Operating to Back
- Adjustment of Relief Valve
- Troubleshooting
- Counterbalance Valve
- Recommended Tools
- Disassembly
- Order of Disassembly and Torque Values
- Reassembly
Main Control Valve (Toshiba dx28-60) S0709440
- Control Valve Operation
- Arm Priority Circuit
- Bucket (Junction) Circuit
- Main Relief Valve
- Overload Relief Valve
- Arm Load Holding Valve
- Boom Load Holding Valve
- Arm Regeneration
- Boom Regeneration
- Foot Relief Valve
- Parts List
- Specifications
- Control Valve Drawing and Hydraulic Circuit
- Disassembly and Reassembly
- General Disassembly
- General Reassembly
- Plunger Replacement
- Main Plunger Element - Disassembly and Assembly
- Tool
- Main Relief Valve
- Overload Relief Valve
- Arm Load Holding Valve
- Boom Load Holding Valve
- Arm Regeneration Valve
- Bucket Unity Check
- Foot Relief Valve
- Center Bypass Valve (CB Valve)
- Boom Parallel Switch Valve
- Boom Unity Check Valve
- Check Valve - Locations
- Check Valve
Remote Control Valve (Work Lever / Joystick) S0709450
- General Description
- Theory of Operation
- Parts List
- Specifications
- Hydraulic Specifications
- Special Tools
- Disassembly
- Reassembly
Steering Valve S0709710
- General Description
- Theory of Operation
- Parts List
- Specifications
- Disassembly and Reassembly
- Tools Needed
- Valve Disassembly
- Valve Reassembly
Hydraulic Schematic (Solar 200W-V) S0792100
- General Description
- Solar 200W-V
- General Notes
ELECTRICAL SYSTEM
Electrical System S0802120
- Troubleshooting - Electrical System
- Wiring Harness Illustrations
- Overview
- Electric Supply System
- Engine Starting Circuit
- Operation During Start Process
- Operation After Start Process
- Engine Preheating System
- Engine Stop System
- Charging System
- Monitoring System
- Instrument Panel and Steering Console
- iNstrument Panel and Steering Console Function Check
- Monitoring System Schematic
- Operation
- Instruments
- Mode Select Switch
- Pilot Lamp
- Initial Operation
- Electronic Hydraulic Control System (EPOS - V)
- Power Mode Control
- Operation
- Throttle Position Sensor
- Power Mode Control - Circuit Diagram
- Work Mode Control
- Operation
- Work Mode Control - Circuit Diagram
- Engine Control System
- Engine Control Motor
- Engine Speed Control Dial
- Engine Control Circuit Diagram
- Automatic Deceleration Control (Auto Idle Control)
- Engine Overheat Protection System
- Power Boost Mode
- Operation
- Power Boost Control - Circuit Diagram
- Cruise Control
- Function
- Cruse Control Circuit
- Adjusting Method of Engine Control Unit
- Adjusting Method of Engine Control System
- Adjusting Method of Engine RPM
- Adjustment of TPS (Throttle Position Sensor) (Refer to Figure 46 thru Figure 48)
- Self-diagnostic Function
- EPOS-V Controller
- Engine Throttle Controller
Electrical Schematic (Solar 200W-V) S0892100
- General Description
- Solar 200W-V
ATTACHMENTS
Boom and Arm S0902080
- Front Attachment Pin Specifications
- Front Attachment - Removal and Installation
- Arm Removal Procedure
- Boom Removal Procedure
- Installation
- Arm Installation Procedure
- Boom Installation Procedure
- Start-up Procedures
Bucket S0904000
- Bucket Tooth Inspection and Replacement
- Bucket O-ring Replacement
- Bucket Shimming Procedures
- New Bucket Installation
- Shimming Procedures for Installed Bucket
- Bucket Attachment, Removal and Reversal
- Detaching the Bucket
- Attaching The bucket
- Reversing the Bucket

Daewoo Solar S200W-V Excavator - Repair, Service and Maintenance Manual

daewoo-solar-s200w-v-excavator-repair-service-and-maintenance-manual001005.jpg

inicio - index

daewoo-solar-s200w-v-excavator-repair-service-and-maintenance-manual001004.jpg

daewoo-solar-s200w-v-excavator-repair-service-and-maintenance-manual001003.jpg

coche - car

daewoo-solar-s200w-v-excavator-repair-service-and-maintenance-manual001002.jpg

moto

4x4

quad - buggy

cami n - truck

e-mail

daewoo-solar-s200w-v-excavator-repair-service-and-maintenance-manual001001.jpg