Iveco Eurotrakker Cursor 13
IVECO EUROTRAKKER CURSOR 13 - WORKSHOP, SERVICE, REPAIR MANUAL
IVECO EUROTRAKKER CURSOR 13 - WORKSHOP, SERVICE, REPAIR MANUAL - English Workshop Manual, to vehicles Iveco Eurotrakker Cursor 13. CONTENTS: SECTION 1 - GENERAL General - Vehicle identification data - P.i.c. Number coding - Composition of models - Replenishing fluids SECTION 2 - ENGINE Engine - Views of the engine - Technical description - Characteristic curves - General specifications - Assembly data - clearance - Fault diagnosis - Fault diagnosis instruments - Modus - it2000 - I.w.t. - Troubleshooting - Tightening torques - Diagrams of tightening sequence of main engine components - Tools - Engine removal-refitting - Stripping the engine on the bench - Repairs - Engine assembly on bench - Engine flywheel - Lubrication - Cooling - Turbocharging - Holset hy55v (vgt turbine) - Holset hx 50w (wastegate turbine) - Feeding - Hydrocar pressure take-off on timing system - p.t.o. (optional) SECTION 3 - CLUTCH Clutch - Description - Specifications and data - Fault diagnosis - Tightening torques - Tools - Removing and refitting the clutch - Checks - Removing-refitting the thrust bearing - Clutch disengagement control (vehicles with zf 16 s 151/181/221 o.d. Gearboxes) - Removing-refitting the pedal unit - Pedal unit - Removal-assembly - Checking and adjusting stops on clutch pedal (vehicles with zf 16 s 151 o.d./181 o.d./221 o.d. Gearboxes) - Hydraulic control (vehicles with zf 16 s 151 o.d./181 o.d./221 o.d. Gearboxes) - Clutch actuator for zf 16 s 151 o.d./181 o.d./221 o.d. Gearboxes - Bleeding the air from the clutch circuit - Clutch actuator for the eurotronic 16 a s 2601 o.d. Gearbox SECTION 4 - GEARBOX Gearbox - Gearboxes zf 16 s 151 o.d. - zf 16 s 181 o.d. - zf 16 s 221 o.d. - Zf gearboxes with intarder hydraulic retarder, types: 16 s 151 o.d. - 16 s 181 o.d. - 16 s 221 o.d. - Gearbox: eurotronic 16 as 2601 o.d. - Gearbox: eurotronic 16 as 2601 o.d. With intarder SECTION 5 - INTARDER - ZF HYDRAULIC RETARDER Intarder - zf hydraulic retarder - Location of intarder hydraulic retarder description plate - General information - Operation - Layout of main system components on the retarder - Removing and refitting the retarder on the zf s 151/181/221-od gearbox - Specifications and data - Tightening torques - Tools - Fault diagnosis - Overhauling the intarder hydraulic retarder SECTION 6 - TOTAL POWER TAKE-OFF (OPTION 2395) Total power take-off (option 2395) - Description - Specifications and data - Tightening torques - Tools - Removing - refitting total power take-off assembly - Overhauling SECTION 7 - REDUCTION GEAR - DIVIDER TC 1800-TC 2200 Reduction gear - divider tc 1800-tc 2200 - Description of reduction gear - divider assembly tc 1800 - tc 2200 - Specifications and data - Version with p.t.o. (opt. 391-392) - P.t.o. Specifications - Using the reduction gear - divider - Torque divider - Tightening torques - Tools - Lubrication - Removing and refitting reduction gear - divider - Removing the reduction gear - divider on the bench - Cleaning and checking parts - Replacing output shaft cover seals - Replacing input shaft cover seal - Input shaft - Epicyclic divider unit - Countershaft - Fitting the reduction gear - divider on the bench - Adjusting the bearing pre-load - Completing assembly SECTION 8 - PROPELLER SHAFTS Propeller shafts - Specifications and data - Fault diagnosis - Tightening torques - Tools - Propeller shaft removal and refitting - Repairs - Checking propeller shafts on vehicles SECTION 9 - AXLES Axles - Fault diagnosis - Rear axle removal - refitting - Front axle 5985/2d (d1385) - Intermediate axles 452191/2d (r 9274) 453291/2d (r 9189) - Intermediate axle 452146/2d (r 9174) - Rear axles 451391/2d (r 8284) 452191/2d (r 8274) 453291/2d (r 8298) - Rear axle 452146/2d (r 8174) - Axles in tandem meritor rt 153e/2d - Section 10 - front axles Front axles - Front axle 5886/d (f9021) - Front axle 5886/2d (f9021) - Wheel geometry SECTION 11 - SUSPENSIONS Suspensions - Front and rear mechanical suspensions - Specifications and data - Front shock absorbers - Rear shock absorbers - Air suspension - Characteristics and data - Main components of the pneumatic system - Fault diagnosis - Tightening torques - Tools - Removal-refitting of front leaf spring - Removal-refitting of intermediate axle leaf spring (8x4 vehicles) - Removal-refitting of rear leaf spring (4x2 - 4x4 vehicles) - Removal-refitting of rear leaf spring on cantilever type suspensions (6x4 - 6x6 - 8x8 vehicles) - Rear cantilever suspension (6x4 - 6x6 - 8x4 - 8x8 vehicles) - Removal-refitting of rear axle longitudinal arm - Removal-refitting of intermediate axle longitudinal arm - Removal-refitting of rear axle triangular arm for vehicles with air suspension - Replacement of the flexible pins of longitudinal/triangular arms - Shock absorbers - Anti-roll bars - Anti-roll bar - Front anti-roll bar - Auxiliary axle anti-roll bar (8x4 vehicles) - Rear anti-roll bar - Intermediate axle anti-roll bar (6x4 - 6x6 - 8x4 - 8x8 vehicles) SECTION 12 - WHEELS AND TYRES Wheels and tyres - Description - Specifications and data - Tools - Fault diagnosis - Staticwheel balancing - Correction of residual static imbalance - Tyre inflation pressures - Relationship of inflation pressure to tyre behaviour SECTION 13 - STEERING Steering - Description - Steering box/vehicle combinations - Specifications and data - Fault diagnosis - Tools - Tightening torques - Hydraulic power steering - Removal and refitting of complete steering column - Main operations SECTION 14 - AIR SYSTEM - BRAKES Air system - brakes - Graphic symbols for air-hydraulic system diagrams (miscellaneous and generators) - Graphic symbols for air-hydraulic system diagrams (valves) - Graphic symbols for air-hydraulic system diagrams (tanks and accumulators) - Graphic symbols for air-hydraulic system diagrams (converters, cylinders and callipers) - Graphic symbols for air-hydraulic system diagrams (callipers and cylinders) - Graphic symbols for air-hydraulic system diagrams (half-couplings and coupling heads) - Graphic symbols for air-hydraulic system diagrams (half-couplings and coupling heads) - Graphic symbols for air-hydraulic system diagrams (indicators and switches) - Graphic symbols for air-hydraulic system diagrams (brakes) - Pipes and fittings - Braking system - Braking system - Description - Brakes - Fault diagnosis - Tightening torques - Tools - Specifications and data - pneumatic system - Specifications and data - brakes - Checks on main components of the braking system - Checks on main components of the braking system - Main components of the braking system - Brake repairs - Front disc brakes sb7 type (vehicleswith partial traction) - Type sn7 disk brakes - Sb7 type brake operation - Checks - Overhauling brake callipers sb7 - Overhauling brake discs - Turning and grinding brake discs on the bench - Turning and grinding brake discs on the vehicle - Drum brakes - Front brakes - Rear brakes SECTION 15 - BODYWORK - CHASSIS FRAME Bodywork - chassis frame - Cab - Tightening torques - Tools - Cab anchoring - Repairs - Replacing cab suspension front and rear shock absorbers - Removing-refitting front mounts and cab stabilizer bar - Replacing hydraulic cylinder for cab tilting - Replacing the windshield - Replacing the winding window - Replacing the window winder - Replacing the fixed window - Replacing sunroof - Cab ventilation and heating unit - Chassis frame - Repairs and checks - Precautions SECTION 16 - SCHEDULED MAINTENANCE Scheduled maintenance - Scheduled maintenance - Extra plan operations - Checks and/or maintenance work - Diagram of points for checks and/or maintenance work - Diagram of points for checks and/or maintenance work - Checks and/or maintenance work - M1 service - M2 service - M3 service - M4 service (only for kilometric intervals) - Extra plan maintenance - Ep2 service - Ep3 service - Ep4 service - Ep5 service
Iveco Eurotrakker Cursor 13 - Repair, Service and Maintenance Manual
inicio - index
coche - car
moto
4x4
quad - buggy
cami?n - truck
e-mail